LED Drivers 30W-90W - Single Ended

Eltam offers a reliable High Power Constant Current smart LED
Driver for indoor and outdoor applications - single ended configuration.

Unique DualAction Dimming Capability
The drivers offer two energy- saving modes: MidNight for autonomous dimming
(10 levels including Off) and DALI control. Thus dimming options are maximised using
eithr a MidNight configuration tool or by direct connection to a DALI controller.

Selectable Constant Current Output
The drivers offer a wide range of selectable constant current output
(Type A: 350mA, 500mA, 700mA. Type B: 700mA, 1000mA, 1400mA).
The current setting is changeable via “on board” DIP switches or via an extended DALI command set.
Optional LED array temperature measurement capability base on NTC type NCP18XH103J03RB
properly mounted on LED array PCB. Default value for protective action 85°C.
Mains isolated input connection. Assumes out(-) potential approximately

Safety
Both drivers have an output isolated from the mains for enhanced safety and versatile
installation possibilities.
The 700mA, 1000mA, 1400mA driver is also SELV equivilant (Safety Extra Low Voltage).

Main Feature:

  • Isolated output.
  • Optimal LED control: Constant current with PWM dimming (no color shift issues).
  • Selectable output current: On board DIP switches or DALI command set.
  • Dimming: MidNight (autonomous) or DALI (10%-100%).
  • Management and Control: Via DALI protocol.
  • Efficiency: >90% (At full intensity).
  • Installation: Easy to install, fits wide range of LED arrays.
  • Protection: Surge compatible, Output Short Circuit, Max Temperature, Output Over/Under Voltage,Line Over/Under Voltage.
  • Optional LED array temperature measurement capability base on NTC type NCP18XH103J03RB properly mounted on LED array PCB.

 

Electrical Data:

  • Nominal Input Voltage - 220V-240V
  • Input Voltage Range - 198V - 264V AC
  • Inrush Current - I²s < 0.15A²s (No fusing issues related to inrush)
  • Frequency - 50-60Hz
  • Power Factor - ≥0.98 (at full load)
 350mA-500mA-700mA700mA-1000mA-1400mA
Output Power
350mA: 31W - 82W
500mA: 33W - 95W
700mA: 31W - 91W
700mA: 31W - 81W
1000mA: 33W - 90W
1400mA: 31W - 90W
Output Voltage Range
350mA: 88V - 235V
500mA: 66V - 190V
700mA: 44V - 130V
700mA: 44V - 115V
1000mA: 33V - 90V
1400mA: 22V - 64V
Current350mA ±5%
500mA ±5%
700mA ±5%
700mA ±5%
1000mA ±5%
1400mA ±5%
IsolationIsolated output
Isolated output SELV equivalent
(Vout<120VDC)
Current SelectionConfigurable by on board DIP switches or DALI (whichever modified last).
Power up configuration according to last settings (whether set through DALI or through DIP switches)
Dimming10%-100% (rated load current modulated by 122Hz PWM)
Efficiencydriver efficiency >90% (At Full intensity)
Output Current Ripple Ratio:≤10% 
Ta
350mA: -40°C to 55°C
500mA: -40°C to 50°C
700mA: -40°C to 40°C
700mA: -40°C to 55°C
1000mA: -40°C to 50°C
1400mA: -40°C to 40°C
Tc max:
350mA: 75°C
500mA: 75°C
700mA: 75°C
700mA: 75°C
1000mA: 75°C
1400mA: 75°C

Control Mode:

  • MidNight
  • DALI

Regulations:

  • Safety: EN61347-2-13
  • Performance: EN62384
  • EMC: EN55015, 61000-3-2, 61547
  • DALI: IEC62386
  • RoHS: RoHS compliant

Protections:

  • Surge protection:

L-PE/N-PE: 4kV
L-N: 2kV

  • Output Short Circuit
  • Output Over/Under Voltage (load voltage out of range)
  • Line Voltage High
  • Line Voltage Low
  • Internal Over Temperature

Installation:

  • Electronic built-in driver
  • Ingress Protection Marking: IP20
  • For luminaires protection class 1
  • Push-in terminals with push-button: 0.5-2.5 mm2

Dimensions:

More Products:

ONSiTE™ – Web Based Management Software.

MiCO™ - MidNight Controller.

CTT™ - MidNight Configuration Technician Tool.

DALink™ - DALI Controller.

Data Sheet - EHSmartDriver LED 30W-90W Single Ended

Need more information?

Do not hesitate to contact our Technical Support

Security code
Download Now
Eltam’s Catalog