EHSmart LED Drivers 30W-150W (non-isolated)

Eltam offers a reliable High Power Constant Current smart LED Driver for indoor and outdoor applications.

Unique DualAction dimming capability
The drivers offer two energy- saving control modes: MidNight for autonomous dimming
(10 levels including Off) and DALI control. Thus dimming options are maximized
using either a MidNight configuration tool or by direct connection to a DALI controller.
Selectable Output Current
The drivers offer a wide range of selectable constant current output
(Type A: 400mA, 500mA, 700mA. Type B: 700mA, 1000mA, 1400mA).
The current setting is changeable via “on board” dip switches or via an extended DALI command set.
Safety
Driver output (type A and type B) is non isolated from the “mains”. Load led arrays need
to be properly insulated.

Main Feature:

  • Non isolated output.
  • LED optimal control: Constant current PWM mode dimming (no color shift issues).
  • Selectable output current: on board dip switches or DALI command set.
  • Dimming: MidNight (autonomous) or DALI (10%-100%).
  • Management and Control: via DALI protocol.
  • Efficiency: >94% (full intensity).
  • Installation: easy to install, fits wide range of LED arrays.
  • Protection: Surge compatible, Output Short Circuit (Lamp+ to Lamp-), Max Temperature,
  • Output over Voltage, Line Voltage High, Line voltage low.

Electrical Data

Input:

  • Nominal Input Voltage: 220V-240V
  • Input Voltage Range: 198V-264V AC
  • Inrush Current: I²s < 0.15A²s (N o fusing issues related to inrush)
  • Frequency: 50-60Hz
  • Power Factor: ≥0.98 (at full load)

Output:

 400mA-500mA-700mA700mA-1000mA-1400mA
Output Power
400mA: 31W - 150W
500mA: 33W - 150W
700mA: 36W - 150W
700mA: 31W - 150W
1000mA: 33W - 150W
1400mA: 36W - 150W
Output Voltage Range
400mA: 78V - 375V
500mA: 66V - 300V
700mA: 52V - 215V
700mA: 44V - 214V
1000mA: 33V - 150V
1400mA: 26V - 107V
Current400mA ±5%
500mA ±5%
700mA ±5%
700mA ±5%
1000mA ±5%
1400mA ±5%
IsolationNon Isolated output
Non Isolated output
Current SelectionConfigurable by on board DIP switches or DALI (whichever modified last). Power up configuration according to last settings (whether set through
Dali or through DIP switches).
Dimming10%-100% (rated load current modulated by 122Hz PWM)
Efficiencydriver-efficiency >94% (Full intensity)
Output Current Ripple≤10% ≤10%
Ta
400mA: -25°C to +50°C
500mA: -25°C to +50°C
700mA: -25°C to +50°C
700mA: -40°C to +50°C
1000mA: -40°C to +50°C
1400mA: -40°C to +50°C
Tc max:
400mA: 75
500mA: 80
700mA: 85
700mA: 75
1000mA: 80
1400mA: 85

Regulations:

  • Safety: EN61347-2-13
  • Performance: EN62384
  • EMC: EN55015, 61000-3-2, 61547
  • DALI: IEC62386
  • RoHS: RoHS compliant

Protections:

  • Surge protection:
    • L-PE/N-PE: 4kV
    • L-N: 2kV
  • Output Short Circuit (only out+ to out-)
  • Output Over/Under Voltage (load voltage out of range)
  • Line Voltage High
  • Line Voltage Low
  • Driver internal Over Temperature

Installation:

  • Electronic built-in driver
  • For luminaries protection class 1
  • Ingress Protection Marking: IP20
  • Push-in terminals with push-button: 0.5-2.5 mm2

 

Dimensions:

Led Driver Wiring Diagram:

More products:

  • ONSiTE™ – Web Based Management Software.
  • MiCO™ - MidNight Controller.
  • CTT™ - MidNight Configuration Technician Tool.
Data Sheet - EHSmartDriver LED 30W-150W

Need more information?

Do not hesitate to contact our Technical Support

Security code
Download Now
Eltam’s Catalog