LonSiTE™

The LonSiTE™ is a Power-line Communication node, specially designed for streetlights and complies with the LonMark® standard.

With the LonSiTE™ and the EHIDALI® ballast, customers are now able to have full control and monitoring abilities of every light point in their streetlights and over the existing power-lines using Echelon’s technology.

Overview:

The LonSiTE™ is a LonWorks® based node specially designed for streetlights and complies with the LonMark® standard.

With the LonSiTE™ and the EHIDALI® ballast, customers are now able to have full control and monitoring abilities of every light point in their streetlights and over the existing power-lines using Echelon’s technology.

Eltam’s LonSiTE ™ solution is based on the LonWorks® control technology and it complies with the International Standard known as ISO/IEC 14908.1.

The LonSiTE™ comes in two different cases for - luminaire mounting and for pole mounting.

 

Key Features >> Your Benefits:

1. Power-line Communication Durability:
Bidirectional communication to the LonSiTE™ node over power-line using a robust and proven repeating mode to assure communication between the LonSiTE™ and the i.LON®controller fits in all places, regardless of the electrical network quality.

2. Low Communication Noise Mechanism:
The EHIDALI® equipped with a noiseless communication module, which does not harm the LonWorks® communication.

3. Extensive DALI Protocol (optional):
Advanced control and monitoring commands which are compliant with part 102 of the DALI standard.

4. LonWorks® - DALI Compatibility:
The EHIDALI® and the LonSiTE™ make a perfect pair as they offer full compatibility of protocols and features.

Technical Info:

Technology:
Bidirectional LonWorks® power-line (according to ISO/IEC 14908-1).
LonWorks® technology meets the 18 most stringent requirements of device control networking.
Integrated with the 3150 neuron chip operating primarily in band C (125-140 kHz) and Secondarily in band B (95-125 kHz).
Protocol in acc. with ANSI CEA 709.1, transmission in acc. with ANSI CEA 709.2.

Interfaces:
Control output: DALI or 1–10 V for max. 4 EBs, Short-circuit-proof
Bistable relay output: closing contact

Electrical data:
Power Supply: 90-230V, 50 Hz
Power consumption <1.2W
Surge voltage resistance 6 kV/1.2/ 50 in acc. with DIN EN 61037
Protection class I/II
Control for power reduction relay: 10mA
Switching current λ=0.8 – 4A

 

Installation:

General Information:

LonWorks Node

Luminaire Mounting:

Pole Mounting:

LonWorks Node

LonWorks Node

Conceptual Overview - LONWORKS.pdf

Need more information?

Do not hesitate to contact our Technical Support

Security code
Download Now
Eltam’s Catalog